Hitachi NR90AE S1 Plastic Collated Framing Nailer Review
Working for long hours can cause muscle strain to the back, the neck and the shoulders. But when you are working with a lightweight nailer like this one, you will not face any issue of this kind. This framing nailer is very easy to carry and maneuverer.
You will not have dead arms after raising them for hours using this nailer. The light weight doesn’t mean less effectiveness, on the contrary. It does the job perfectly and works on any surface thanks to its depth adjusting tool. This framing nailer features a 2 step nail reloading, for time saving and easy use. Below are some of the most important features it offers:
Improved Head Guard
This new design features an improved new head guard. It is very easy to remove it when you are planning to disassemble the nailer, which could happen for a number of reasons. There won’t be a dozen tools to carry around nor there a lot of time spent.
You don’t have to be an expert if you want to disassemble this nailer to clean it. It is also quite safe and will save your time and energy. Your tool maintenance will be so easy thanks to the sleek smart design. The nailer also features an easy jamming release. This is very important because looking for tools in the middle of a job is just wasting valuable time.
Easy Tool Free Adjustments
This model of Hitachi is just 10 pounds but this doesn’t mean that it lacks the features offered in bulkier and heavier models. It has a tool free depth adjustment system that is quite handy and will make this framing nailer the best to use with any surface and with any project.
You will be able to drive any nail that ranges from 2 inches to 3.5 inches to the maximum depth possible. You can also switch between bump firing mode and sequential firing mode, simply by flipping a switch.
This means, that you can adjust the way your nailer works according to your personal preference and the job requirements. There will be no down time and no extra cost. You will not have to buy any additional tools nor pause your work to adjust the settings on this nailer.
Accidents happen and while working with tools and machines, one must be very careful to look for a tool that is very safe within an available budget. Trading safety for money is not even an option. This nailer comes with safety glasses to protect the eyes.
You will be able to see your work space perfectly and you will not be subject to any hazard. The nailer also has a safety grip. It is made of rubber so it is easy to carry without straining your hand, unlike holding onto a metal grip. It will also not slip easily for maximum safety and convenience.
Highlighted Features and specification
- It has Selective actuation which help quick changes between sequential and contact nailing.
- 2 piece anodized aluminum magazine for easily repairing or replacing
- 2 step nail reloading which save your valuable time
- For Clearing Jam just Open the Nose and clear the jam easily
- Tool-less Depth Adjustment system
- Lightweight and well-controlled
- Rubber grip for maximum comfort and secure grip
- Magazine Angle: 21 Degrees
- Magazine Loading: Rear
- Nail size: From 2 inch to 3-1/2 inch
- Magazine Capacity: 64 nails
- Air pressure: 70-120 PSI (5.5-8.3 bar)
- Included metarial: Safety Glasses
- Weighs 7.5 pound
- Dimensions : 1 x 1 x 1 inches
- Warrenty: 1 year limited warranty
- Sturdy design that comes with a small weight for maximum control.
- Safe rubber grip.
- Easy tool free adjustment.
- Easy to remove head guard for time saving during tool maintenance.
- Some might not prefer the 2 step nail reloading feature, as there are some models where you can do that in a single easy step.
Frequently Asked Questions
Q: What is the difference between old NR90AE(S) & new NR90AES1?
A: Very little difference actually exactly same. Just on the back cap NR90AE(S) has 4 Allen screws but NR90AES1 has 2 Allen screws. Just The molding of the back is a little different and rest of the things are same. They operate exactly same.
Q: What is the weight of this nailer?
A: It weighs 7.5 pounds which is super easy to carry and control.
Q: What is the degree of this nailer?
A: It is a 21 degrees framing nailer that is perfect for any job.
Q: Does it come with a hanger hook?
A: No, it doesn’t.
This finish nailer has all the important features that can be found in a professional industrial framing nailer. It is quite compact at 7.5 pounds which makes it super easy to handle and carry around. It won’t slip thanks to the rubber grip and you will be able to use it with any plastic collated nails from 2 to 3.5 inches with ease.
You will not have to buy any tools to disassemble this nailer or to adjust depth for various tasks. There is however, the issue of nail reloading which some people are not very comfortable with. It is a 2 step process that might seem like time wasting for some users. Although, at this price this nailer is simply unbeatable.