Top 5 Best siding Nailer 2018: Reviews and Purchase Guide

The best siding nailer to help you set up siding on your home. Different from a framing nailer, for example, a siding nailer has one main job: join non-wooden material or thinner wooden pieces into wood made set up.

If you are going to be installing siding, it is essential to have the best siding nailer for the job. The best tools keep up to our on the job item examining. We analyze for the dry flame lockout, running coils nails speed, and ergonomics.

In the past Woodworker used framing nailer for siding job but as framing nailers have huge power and create some problems as a result job could not be finish properly. Besides for siding job woodworkers had to use rubber domes with their framing nails.  But when Siding nailer came to the market people loved to use this tool. 

As siding nailer has a nice smooth protector in front of the nailer it doesn’t  make any marks into the board's where framing nailer create marks and this is the big difference between Siding nailer VS Framing nailer.

 Here you can know more about difference between Siding nailer VS Framing nailer.

When you use something on a ceiling throughout the day, it needs to experience great in the side while executing continually and more efficiently. It also must have the ability to perfectly and continuously, fire siding nails into the framing material and roof decks.

How to select the Best siding nailer

If you want to try the electric siding nailer, several models are available. Some have attached cables, and others are cordless.

Electrically operated models include enough power to carry out siding tasks even though not as strongly as pneumatic nailers would.

Therefore, you should keep in mind all the types as well as features when purchasing new siding nailer. Here are some of the features we have mentioned below:

Collation

House siding nailers have a few typical features. To “fill a few, shoot a few” 60shot framing/siding nailers; coil-fed tools are completely different type. Their round-drum magazine agrees to coil comes of nails containing 200 to 300 nails (depending on the nail dimension.)

The coils come in two flavors: plastic-collated and wire-collated. We discovered that wire collation is far stronger than plastic material. Our evaluators said that if a plastic-collated were bumped around, you might as well ignore about using it.

Nails are set in small strip lines in a plastic material remove, and if they are jarred out of place, they will nourish the nailer wrongly and jam the siding nailer.

Versatility

My team moves, so we have an excellent experience for getting and fixing tools far from our family platform. Particular nails may not be available regionally, so although we choose wire collations, we may have to use plastic material.

The capability to refill easily and not have to look for providers for tool-specific nails is significant to us. The Max, Hitachi, Fasco, Makita and Senco models agree to both collation models. Stanley Bostitch and Porter-Cable accept wire collations, and the Duo-Fast nailer only allows Duo-Fast product plastic-collated nails.

Best Siding Nailer

Performance

Seven of the eight nailers conducted well in a controlled atmosphere, capturing and establishing nails in hardboard, wood, and two thicknesses of fibers cement. Surprisingly, the Porter-Cable nailer, which launches the thickest gauge nails, continually curved nails in the fibers cement laps.

Recommended Best Siding Nailer

If you want to purchase the best siding nailer, we suggest reading the reviews of at least 5 to 10 siding nailer’s brand, their features, quality, material, and functionalities so that you can decide what is the best and most suitable nailer for you. If you are unable to decide, we have selected some most popular brands reviews in short words here. Keep reading this.

​Best Siding Nailer - Comparison chart

Image

Product Name

Power Source

Item Weight

Pressure

Nail Size

Hitachi NV65AH 2-1/2-Inch Coil Siding Nailer
air-powered

5 lbs

70-120 PSI

1-1/2"-2-1/2"

BOSTITCH N66C-1 Coil Siding Nailer

air-powered

4.4 lbs

70 -120 PSI

1 ¼" – 2 ½"

Hitachi NV65AH2 Coil Siding Nailer

air-powered

4.6 lbs

70 -120 PSI

1 ½” – 2 ½”

Freeman PCN65 Coil Siding Nailer

air-powered

9 lbs

70 -120 PSI

1 ¼” – 2 ½”

Hitachi NV50AA Utility Siding Nailer

air-powered

4.2 lbs

70 -120 PSI

1-1/4" - 2"

Makita AN611 1-14-Inch to 2-12-Inch Coil Siding Nailer

air-powered

5 lbs

65 – 120 PSI

1-1/4” to 2-1/2”

Max Siding nailer

corded-electric

7 lbs

70-100 PSI

1-1/2" to 2-1/2"


Hitachi NV65AH 2-1/2-Inch Coil Siding Nailer

The Hitachi NV65AH2 air-powered coil siding nailer drives 1-1/2"-2-1/2" plastic or wire collated coil siding nails. It has a five-year warranty.

Lightweight and well-balanced design make this Hitachi coil siding nailer very easy to use.

Features an updated depth of drive dial for precise control, adjustable exhaust, no-mar tip to prevent surface damage, selective actuation, side load (tilt bottom magazine) and comfortable rubber hand grip.

Applications for the Hitachi NV65AH2 coil siding nailer include siding, cement board, fence boards, deck railings and packaging. This siding nailer has so many uses you cannot call it a House, Siding Nailer.

The ability to agree to both plastic and cable collated nails (1-1/2-and 2-1/2-inch) makes this siding nailer unique. This siding nailer is only 4.6 pounds. It has a tool-less depth of drive adjustment that can countersink or cleanse drive your nails. It has the power to push case solidified nails into CEMENT!

Highlighted Features

  • Particular actuation change allows for either contact or sequential nailing with the simple turn of a switch
  • Plastic cover deflects cable collation for included safety
  • Tool-less depth adjustment for maximum depth in a variety of applications
  • Drives cable and nasty piece collated nails for included flexibility
  • Side fill, point bottom magazine for quick and simple reloads

Pros

  • Hitachi NV65AH2 is very  efficient nailer for its high-capacity magazine and tool-less depth adjustment and this feature makes the nailer exception from other nailer.
  • This tool has an Air Deflector which is an another nice additional feature of this nailer. This air deflector that can rotates 360 degrees to direct exhaust in any direction you like. 
  • Get valuable extra  tools: safety glasses, and hex bar wrenches.

Cons

  • Price is little bit higher
  • thumbs-down
    Sometimes nailes are get gammed when you're firing so fast. So be careful and it's not too difficult to clear.
BOSTITCH N66C-1 Coil Siding Nailer

Designed for use in a variety of applications such as walls, cedar-shake roofing shingles and timber house siding, the Bostitch 2-1/2 in.

Coils Siding Nailer provides 500 in. lb. of generating energy for 1-1/4 to - 2-1/2 in. nails.

The siding nailer's adjustable depth information provides practical establishing of nails with the light and portable steel real estate provides sturdiness. This unit has a flexible exhaust that can be indicated away from the user.

Bostitch house siding nailer features via the pneumatic motor and is run of compacted air at demands of 70 to 120 PSI. This nailer also has a built in flexible exhaust release enabling the user to point exhaust fumes in any route.

The lightweight mineral magnesium body delivers the total tools bodyweight down to 4.9 pounds. The Bostitch N66C house siding nailer also features something 100 % free flexible nail depth adjustment; providing the perfect energy for assembling your shed. In addition to this nailer is a heavy-duty bag.

Highlighted Features

  • 500 in. lb. of generating energy for maximum performance
  • Compatible with 15 Degree cable weld and nastily placed coil nails
  • Tip has soft rubber foot to help avoid harm to smooth wood
  • Adjustable-depth information quickly sets nails to the preferred depths
  • Tool-free flexible exhaust guides exhaust away from the user
  • Drives 1-1/4 in. - 2-1/2 in. nails
  • Metal real estate provides strength
  • Includes the nailer and a holding case
  • Lightweight, 4.7 lb. Design for maneuverability
  • For set up of house siding, roofing shingles, walls and more

Pros

  • BOSTITCH N66C is Very powerful and top quality nailer.
  • Soft-nose Protects your material from nailer hit.
  • Has a nice handle on it to hang on ladder when not in use.
  • very Easy to use depth adjustment guide.
  • thumbs-up
    Tool-free adjustable exhaust drives fumes away from the user when you're working.
  • thumbs-up
    No jams and Misfires at all. Very easy to reload.

Cons

  • The only drawback of BOSTITCH N66C is that there is no switch for changing the trigger – so you need to switch them out manually. Not a big issue!
Hitachi NV65AH2 Coil Siding Nailer

Particular actuation change in Hitachi NV65AH2 Coil Siding Nailer allows for either successive or contact securing with the simple flip of changing.

Side load, point bottom magazine for quick and simple reloads.

Tool-less depth adjustment for maximum depth in a variety of applications. The plastic protecting shield deflects cable collation for more safety. No-mar nose cap defends material from random marks.

Light, portable, and resilient, the Hitachi NV65AH2 Coil Siding Nailer is a contractor-preferred pneumatic nailer with high-performance abilities. This is an ideal nailer for siding, walls, deck, ceiling sheathing, and more.

The Hitachi NV65AH2 Coil Siding Nailer has everything you need, along with a high-capacity magazine, tool-less depth adjustment, a 360-degree exhaust diverter, and a pneumatic drive system.

Highlighted Features

  • Drives cable and plastic content piece collated nails for more flexibility
  • At 4.6 lbs., it is lightweight small for easy maneuverability
  • Depth of drive adjustment to countersink or cleanse drive nails
  • No-mar nose cap connection defends content from random marks
  • Adjustable air deflector guides the air exhaust in any direction
  • Long-lasting rubberized hold for more comfort
  • Plastic protecting shield deflects cable collation for more safety

Pros

  • The most amazing benefit of this nailer is that it can shoot nails at an impressive rate of 3 per second whether the nails size are big or small.
  • The side load, tilt bottom publication help you to reload the nails easily   and  save time.
  • Adjustable air deflector
  • Movable exhaust on the top of the head. 
  • thumbs-up
    Additional accessories: Safety Glasses, Hex Bar Wrench  

Cons

  • It did not come with any hook. It will be great for handling if it would have hook

Makita is one of the best siding nailer.
Most of the woodworkers love makita for its some exceptional features. May be you won't get this features from others nailer like bostitch, hitachi etc.

Read the full review of Makita AN611.
The 1st and most important feature of
makita is it has tool- less 9 depth adjustment setting for accurate nailing and you can easily control this
depth adjustment.

The 2nd important feature is it has 3 mode of trigger selector: contact, sequential, and lock mode, whereas others nailers have 2 mode of selector contact and sequential.

If you want to diagonal nailing an ideal shape of no-slipping nose is attached to this nailer. Others great features of makita are: soft Rubber grip for holding comfortably.

Built-in air filter which will prevent dust and debris from entering tool. For siding nailing you can use 1-1/4" to 2-1/2" nails of 0.080 - 0.099 shank diameter nails and also can hold a lot of magazine 300 to 400.

Highlighted Features

  • Tool- less 9 depth adjustment setting.
  • Three mode of trigger selector
  • Non sliping nose for exact nailing
  • Rubber bumpers to protect  work surface
  • Silent sheet to reduce noise
  • Easy system to load and unload magazine

Pros

  • Very powerful and durable tool
  • Easily watch how many magazine are left through the canister 
  • precise depth adjustment
  • 360 degree movable exhaust on the top of the head. 
  • thumbs-up
    Additional accessories: Safety Glasses, Hex Bar Wrench  

Cons

  • Somewhat pricey
  • Sometimes recycle fails after driving a nail.
Freeman PCN65 Coil Siding Nailer

The Freeman PCN 65 coils Siding Nailer is the perfect nailer for dealing with wood roofing shingles, ceiling, walls sheathing, house siding set up, and walls.

If your budget is very low then you must look for this because i think this Freeman PCN65 Coil Siding Nailer is the lowest price among the Siding nailer. 

Freeman PCN 65 coils Siding Nailer is capable of using cable or nasty collated nails, which removes corrosion lines on house siding and walls set-ups.

One of the Amazing feature of  Freeman PCN65 is it has built-in safety locks.The nailer features tool-free depth adjustment for attaching a large number of components, part and front side effect bumpers for protecting shield ion and a 360-degree flexible exhaust for clean, secure use. The nailer's body is made of light, portable, and sturdy die-cast magnesium.

Highlighted Features

  • Protecting shielded by part and front side effect bumpers
  • Anodized metal parts for less internal wear and tear
  • No-mar tip inhibits damage to work surface
  • High-quality rubber O-coils for longevity
  • Side running tube and fast driving for efficiency
  • Tool-less depth adjustment for handling some materials
  • Quick running for ease of use
  • Shoots 15-degree nails ranging from 1-1/4 in.To 2-1/2 in.
  • Constructed from light and portable and sturdy die-cast magnesium
  • Contact fire for secure and precise fastening
  • Trigger protecting shield ion for secure use

pros

  • Die-cast magnesium body for low weight and durability. 
  • Anodized aluminum cylinder and high quality rubber o-rings for long  life.
  • This tool has a very nice handy hook which help you to hang on your tool belt to free up your hands
  • Adjustable exhaust and an air filter help you to prevent dust and other things & keep this machine operating on point at all times.

Cons

  • It's heavier than other nailers.
  • Sometimes it misfires but if you do the right way it won't problem
Hitachi NV50AA Utility Siding Nailer

The Hitachi NV50AA 1-1/4-Inch to 2-Inch Mild Responsibility Coils Application Nailer is sensible and lightweight at 4.2-pounds.

This tool is best for construction work like wall sheathing, roof decking and sub-flooring and also great for a variety of applications, including woodwork, metalwork, concrete, cutting, drilling  and fastening.

It has a great potential magazine that stands up to 385-nails. An open magazine tube allows quick verifying of nail amounts.

This siding nailer is a working equine. I have used one of this nailer for five years, and it is only required to have its closest modified once. This siding nailer has gone through sun, rainfall, mud, and snowfall.

The Hitachi NV50AA is very fast, snappy and very rarely jam also you don't need any headache of misfires or mis-feed. 

It is light, simple to refill, and nail positioning is simple to find. I have used this nailer on wood and wood roofing shingles as well as Masonite house siding, and Douglas fir deck.

The only thing that I can view on the adverse is that the nasty links on the coil nailers are very temperamental in the cool. The nasty hyperlinks seem to enter cool circumstances (32 levels or below). Otherwise a great siding nailer.

Highlighted Features

  • High potential magazine at 385 nails
  • Low air intake on your compressor
  • Wire and nasty coil nails
  • 30-day fulfillment assurance and one-year assurance on areas and labor
  • High potential magazine at (385) nails

Pros

  • Hitachi NV50AA is designed so purely that the angled allows nailing magazine in tight spaces.
  • It can hold highest amount of nails than the other nailers.
  • You Can easily see how many nails are left just by opening magazine canister.
  • Very lightweight and well-balanced just 4.2 lbs
  • Included accessories: safety glasses & hex bar wrenches.

Final Verdict

Whether you are an expert dealing with the best siding nailer on a daily basis, or if you are an occasional carpenter looking after those DIY tasks about the home, we have your best siding nailer, needs protected.

To keep this easy and for your leisure, if you already have a nailer in thoughts then you can surf by item name and look above mentioned reviews we have created for you.

On the other hand, if you are not at that level yet, then you can just have a look at the ‘best siding nailer reviews of our five products, you can see at a look best siding nailers for your job.

You will know in a short time the nailer that you need. These are the all the best nailers found according to the positive customer reviews on Amazon, and we have selected all these the best ones.

Jack Reacher
 

Howdy Visitor, I am Jack Reacher here for help you to find perfect nailer reviews. I was working longtime with nailer reviews and lots of experience about it. I am trying to write some honest review about framing nailer.

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

%d bloggers like this: